» Compatibility ATAPI-6 and True IDE mode
» Flash Technology NAND type SLC flash based
» Form-factor CompactFlash type I
» Host Interface 50 pins
» Performance
     ´ Data transfer mode PIO-4 mode or UDMA-4 mode (Default setting)
     ´ Data transfer rate
         - 66.6MB/sec under UDMA-4 mode
         - 16.6MB/sec under PIO-4 mode
     ´ Sequential read 40 MB/sec (Max. /with dual flash)
     ´ Sequential write 20 MB/sec (Max. / with dual flash)
     ´ Average access time 0.2ms (estimated)
» Environmental specification
     ´ Operating temperature Standard grade -40 degree  ~ +85 degree
     ´ Non-operating temperature Standard grade -50 degree  ~ +95 degree 
     ´ Humidity 10% ~ 95% non-condensing
     ´ Acoustic noise 0dB
     ´ Vibration 15G compliance to MIL-STD-810F
     ´ Shock 1,500G compliance to MIL-STD-810F
     ´ Altitude 70,000 feet
» Power consumption
     ´ Power requirement +5V + 10%  /  +3.3V + 5%
     ´ Reading mode1 Channel 78mA(Max.) / 2 Channel 124mA(Max.) UDMA4 Mode
     ´ Writing mode 1 Channel 67mA(Max.) / 2 Channel 121mA(Max.) UDMA4 Mode
     ´ Sleeping mode 1 Channel 1.2mA(Max.) / 2 Channel 1.8mA(Max.) UDMA4 Mode
» Reliability
     ´ Wear-leveling Static wear-leveling algorithms
     ´ MTBF > 3,000,000 hours
     ´ ECC Enhanced management 4-bits per 512bytes block
     ´ Endurance > 2,000,000 cycles logically contributed by static wear-leveling and advanced
bad sector management algorithms
     ´ Data reliability < 1 non-recoverable error in 1014 bits read
     ´ Data retention 10 years
» Physical specification
     ´ Weight (max.)12.0g/ 0.42oz
     ´ Dimension (W x L x H) 42.8 x 36.4 x 3.3 (mm)
» Conformal coating Option for special request