» Compatibility ATA/ATAPI-7 and True IDE mode
» Flash Technology SLC-NAND type flash based
» Form-factor Rugged Metal 2.5¨ PATA (IDE) SSD
» Host Interface Standard 44-pin PATA (IDE) male connector
» Master / Slave setting By jumper
» Performance
´ Data transfer rate PIO-4 mode or UDMA-6 mode (def.)
´ Sequential read 105.0 MB/sec (Max.)
´ Sequential write 100.3 MB/sec (Max.)
´ Average access time 0.2ms
» Environmental specification
´ Operating temperature Standard grade 0 degree ~ +70 degree 
´ Non-operating temperature Standard grade -20 degree ~ +80 degree
´ Humidity 10% ~ 95% non-condensing
´ Acoustic noise 0dB
´ Vibration 15G peak-to-peak max
´ Shock 1,500G (MAX)
´ Altitude 70,000 feet
» Functionality
´ Hardware Fast Erase the media data by hardware trigger
´ Software
- Fast Erase the media data by ATA command vender code
- Secure Erase the media data by ATA command vender code
´ Sanitization Procedure
- Default sanitizing by erase block data to 0xFF on file table for Fast Erase
- Sanitizing Based on NSA Manual 130-2 for Secure Erase
- Sanitizing Based on USA Air Force AFSSI 5020 for Secure Erase
» Power consumption
´ Power requirement +5V + 10%
´ Reading mode 360mA (Max.)
´ Writing mode 390mA (Max.)
´ Sleeping mode 240mA (Max.)
» Reliability
´ Wear-leveling Static wear-leveling algorithms
´ MTBF > 3,000,000 hours
´ ECC Supports BCH ECC 8 bits or 15 bits in 512bytes
´ Endurance > 2,000,000 cycle
´ Data retention 10 years
» Physical specification
´ Weight (max.) 115g + 5g /4.06oz
´ Dimension (W x L x H) 69.90 x 99.70 x 9.50 (mm)
» Conformal coating Option for special request