»Compatibility
Serial ATA standard rev. 1.0a
» Flash Technology
SLC-NAND flash type based
» Form-factor
Compact-designing in horizontal type low profile bare form-factor
» Host Interface
Standard 7-pin SATA female connector
» Performance
   ´ Data transfer rate: Serial ATA standard Gen1(1.5Gbps)
   ´ Sequential read: 24 MB/sec (64MB file test / 4GB mSATA)
   ´ Sequential write: 14 MB/sec (64MB file test / 4GB mSATA)
   ´ Average access time: 1.0ms (estimated / 4GB mSATA)
» Environmental specification
   ´ Operating temperature: Standard grade 0˚C ~ 70˚C / Industrial Grade -40˚C ~ 85˚C
   ´ Non-operating temperature: Standard grade -20˚C ~ 80˚C / Industrial Grade -50˚C ~ 95˚C
   ´ Humidity: 10% ~ 95% non-condensing
   ´ Acoustic Noise: 0dB
   ´ Vibration: 15G compliance to MIL-STD-810F
   ´ Shock: 1,500G compliance to MIL-STD-810F
   ´ Altitude: 70,000 feet
» Power consumption
   ´ Power requirement: 5V power input power cable (w/o fuse)
   ´ Reading mode: 155 mA (Max.)
   ´ Writing mode: 170 mA (Max.)
   ´ Sleeping mode: 105 mA (Max.)
» Reliability
   ´ Wear-leveling: Dynamic wear-leveling algorithms
   ´ MTBF: > 3,000,000 hours
   ´ ECC: Enhanced management 8-bits per 512bytes block
   ´ Endurance: > 2,000,000 cycles logically contributed by dynamic wear-leveling and advanced bad sector management algorithms
   ´ Data reliability: < 1 non-recoverable error in 1014 bits read
   ´ Data retention: 10 years
» Physical specification
   ´ Weight (max.) : 20 g / 0.71 oz
   ´ Dimension(W x L x H) : 27.48mmx30.0mmx9mm