SCSI 1, 2 50 pin Disk Drive Emulator to CF (SCSI Emulator for SCSI Drives)

Description
The SCSI Emulator allows CF Cards up to 16GB to attach to the SCSI bus. It is seen as a SCSI drive by the host. The SCSI emulator operates with many SASI, SCSI-1, or SCSI-2 drives and can be programmed to emulate the host systems requirement.

CF card is seen as a SCSI disk device to the Host
Compact Flash card, which will be seen as a regular SCSI disk device SCSI bus on the Host’s SCSI bus

  • Features:
  • Specifications:
  • Warranty:
  • Small format PCB converts Compact Flash Media to appear as a SCSI device on a Host’s SCSI bus
  • 3.5” form factor PCB which will replace any 3.5” disk drive or larger drives with adaptor
  • Will fit in a 3.5” disk slot using the same mountings
  • SCSI Host will typically see the device as a disk drive of any emulation
  • Board is low power, using 5V only, and has an optional add-on display and pushbutton user interface
  • Microcode is field upgradable via integral serial port
  • Optional integration support available if required

Board size: 3.5” Form factor – 3.75”x5.5”.


Compact Flash: Standard 3M header for Type 1 & 2 cards

Power: 5 Volts only @ 0.8 Watt (Typical) + CF requirement.

Power connector: Standard Disk drive type SCSI-1 and 2 Compatible. 50 pin DIL 0.1” Connector

SCSI transfer rate: 10Mbytes/second.

LCD Display: (optional) 2X16 backlit display with push button (mounted externally) for SCSI set-up , real time activity display and real-time diagnostics.


RS232 Serial Port for microcode load and real time diagnostics.

-Not Defined-
Click here to return to your last viewed page

 

Key Search Term:

 SCSI Emulator; SCSI Emulation: SCSI 1 Emulator; SCSI2 Emulation; SASI Emulation; SASI Emulator

Design: Bluemonkey
Bookmark and Share